Service tyre pressure system.

Seb

Seb

Junior Member
Messages
28
Hi guys have this message on my 2015 gts. The valve sensors are reading but not being recognised.
Any ideas please.
Cheers Seb
 
CatmanV2

CatmanV2

Member
Messages
48,789
Seb said:
Hi guys have this message on my 2015 gts. The valve sensors are reading but not being recognised.
Any ideas please.
Cheers Seb
Click to expand...

Get it scanned and see what the faults are. Clear and see if that fixes it. The faults that come back are probably the problem. At least that's what I would do

C
 
Seb

Seb

Junior Member
Messages
28
Thanks C.
Will do, however maserati specialists near Peterborough are rather thin on the ground.
 
CatmanV2

CatmanV2

Member
Messages
48,789
Seb said:
Thanks C.
Will do, however maserati specialists near Peterborough are rather thin on the ground.
Click to expand...

You can grab an Autel AP200 for around £70 which will tell you what you need, or I'm only down the M11 (and heading up it next month) and happy to help :)

C
 
Seb

Seb

Junior Member
Messages
28
I have a friend who is a garage owner and fellow Maser owner. Says he will see if he can check it. I would have no idea what to do with an ap200 .
Really appreciate your offer will take you up on it if no success.
Always keen to have a drive somewhere.
Seb.
 
CatmanV2

CatmanV2

Member
Messages
48,789
Seb said:
I have a friend who is a garage owner and fellow Maser owner. Says he will see if he can check it. I would have no idea what to do with an ap200 .
Really appreciate your offer will take you up on it if no success.
Always keen to have a drive somewhere.
Seb.
Click to expand...

Well I can show you how to use it as well :)

C
 
Seb

Seb

Junior Member
Messages
28
Well, all wheel sensors are reading and transmitting. But the TP module is not recognising. So maybe a new module required is this a main dealer job to set up the software?
 
Seb

Seb

Junior Member
Messages
28
Well sorted now took it down to Barr Tech in Cambridge. All wheel sensors working just not getting through to the module. Transpired after a lot of electric testing a wire was corroded inside some trunking. Cut the offending length out and soldered new length in sorted.
Apart from RAC warranty won't cover it as it was corrosion, typical.
 
You must log in or register to reply here.