Replacing the Servo on 156 2.5 V6 Year 2000 model

[Pavlos]

Have been asked by a friend if possible to get info on how difficult it is to replace the brake master & the servo on a year 2000 Alfa 156 2.5 V6.

Is it a DIY task ? Any idea what is the simplest way to do it ?

 

[lisknik]

I will be interested in that, my brakes are ****!!!

 

[Smaky]

As far as it goes, it is easier on the V6 that the twinny, but the rear exhaust manifold still makes access a little tight. Still only 2 x 13mm nuts and 4 pipes/hoses, then a full system bleed.

Nik if you want them improving then just ask.

 

[lisknik]

I be asking Alex!!

 

[Smaky]

Come on up then..

Can't do this saturday though, shall be advancing with project certain death...147 20VT...

 

[lisknik]

Come on up then..

Can't do this saturday though, shall be advancing with project certain death...147 20VT...

Not just at the mo, all my money is tied up for a few weeks.

Oooo any pics of that??

 

[Smaky]

I'll get some tomorrow as we're bolting it all together to check it'll fit fine and to prefit the wiring before final construction of the looms.

 

[lisknik]

I'll get some tomorrow as we're bolting it all together to check it'll fit fine and to prefit the wiring before final construction of the looms.

Will it be ready in time for alfaholics??

 

[Smaky]

I doubt it, I get 2 days a month to play on it between sorting out all the other destroyed cars from the east of me...

 

[lisknik]

I doubt it, I get 2 days a month to play on it between sorting out all the other destroyed cars from the east of me...

You going to Alfaholics this year, i will have a new toy there ?

 

[Smaky]

Tep I'll be there, just in case anyone needs some emergency chassis straightening....

P.S.

 

[lisknik]

I hope that goes as good as it looks!

 

[furrybadger]

 

[lisknik]

That's ****!!!