The good evening thread

Alfa Muppet

Member
Messages
1,723
Good news, got the oil cooler pipes off of the 164 after removal of the power steering pump and power steering pump bracket and cutting down a 24mm socket to get at the banjo Union and avoid removing the drive shaft - what a nightmare job that turn out to be!!!!!!

Aircon pump to go

Semi bad news - the 90 failed the MOT on just one rear wheel bearing - all in all not too bad but may be a nightmare to do, so I may pay the garage to sort it.

Feeling slightly frustrated :frusty5:
 

Alfa Muppet

Member
Messages
1,723
Progress - Aircon pump in, new oil cooler pipes made up. The pipes look a bit industrial, just hoping they fit otherwise I will have to find another solution

Looks like the aircon pump leaked all its oil and siezed causing the bearing failure - yellow die and oil seen through the front plate seal.
More fun and games tomorrow

image.jpg

image.jpg
 

Alfa Muppet

Member
Messages
1,723
All pipes installed with new aircon O rings and copper washers where appropriate, air dryer, alternator, powerstering pump and oil cooler also now in. The oil cooler is sitting a little higher so will need to adjust in the future, just time and olives!!, but at least now I won't have to remove the power steering pump

Just waiting to put in a new shock absorber for the tensioner which should arrive on Tuesday, top up the fluids and test run and check for leeks

Fingers crossed all should be OK :)

image.jpgimage.jpgimage.jpgimage.jpg
 

lisknik

Member
Messages
5,524
Stressful day at Duncans today, but i am a happy bunny, i have the 33 for tomorrow, freshly out the body shop and mot'd.

Mind had a chuckle at this Halfords GT!

IMG_5132.jpgIMG_5133.jpg
 

lisknik

Member
Messages
5,524
Evening all, that be the 33 petroled up, all checks done ready for the off Saturday, got to get the 156 into Bristol after work tomorrow and get the bus back!! :(

So looking forward to Brooklands :)
 

conaero

Forum Owner
Messages
34,716
Evening Nik.

Yes I saw the comedy GT at Duncs. Its a car only its mother could love!

Sadly won't be at Brooklands but I will be under the Spider hopefully get the engine back in, well, bolted in anyway.