conaero
Forum Owner
- Messages
- 34,676
If you find that your front seats behave irrationally or do not move fully forward when using the seat back tilt, then you need to reset them.
With the ignition to off open the door on the affected side and very quickly press the seat forward, then back, then forward, then back, then tilt the seat back forward.
This procedure must be started within 5 seconds of opening the door and be completed within 10 seconds.
If you have correctly completed the reset, the seat will move fully forward, then fully back, then fully forward again, then fully back.
At this point, return the seat back to its normal upright position and set the position of the seat for use.
The process is now complete.
With the ignition to off open the door on the affected side and very quickly press the seat forward, then back, then forward, then back, then tilt the seat back forward.
This procedure must be started within 5 seconds of opening the door and be completed within 10 seconds.
If you have correctly completed the reset, the seat will move fully forward, then fully back, then fully forward again, then fully back.
At this point, return the seat back to its normal upright position and set the position of the seat for use.
The process is now complete.